Advanced Speed and Range with Comprehensive Internet Security

Up to 15x the speed and 10x the coverage of 802.11g networks

Concurrent operation in 2.4 GHz and 5 GHz radio band for maximum wireless throughput

Backward compatibility with 802.11a, 802.11g and 802.11b network devices

Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support

Support for 802.3af PoE for optimal placement of access point
Features

Up to 15x the speed and 10x the coverage of 802.11a, 802.11g networks

Operation in 5 GHz radio band to avoid interference from 802.11b or 802.11g network devices

Concurrent operation in 2.4 GHz and 5 GHz radio band

Backward compatibility with 802.11a, 802.11g and 802.11b network devices

Integrated 802.3af PoE eliminates extra cables and enables optimal placement of the access point

Comprehensive SNMP functionality for advanced network management

Deploy wireless coverage over large areas with point-to-point and point-to-multipoint bridging via Wireless Distribution System (WDS)

Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support

Plenum-rated for safe and convenient placement above drop-down ceilings

Metal case includes Kensington lock slot for anti-theft

Internal antennas factory-optimised for maximum RF performance

Antenna take-offs enable optional accessory antenna attachment for 2.4 GHz operations

Lifetime hardware warranty
Standards

IEEE 802.11n draft 2.0 specification, 2.4 GHz and 5.0 GHz

IEEE 802.11g, IEEE 802.11b, 2.4 GHz

WMM - Wi-Fi Multimedia prioritisation

Wireless Distribution System

IEEE 802.3af Power over Ethernet (PoE)
Physical Specifications

# Dimensions: 32 x 190 x 124 mm (1.25 x 7.5 x 4.9 in)

# Weight: (.56 kg) 1.2 lb
Physical Interfaces

One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support

Power adapter: 12V DC, 1A; plug is localised to country of sale

Five (5) LEDs: power, test, 100/1000 Mbps, link/ACT, 2.4 GHz band, 5.0 GHz band

One (1) console port with standard RS-232C interface with DB-9 male connector

Two (2) reverse SMA antenna connectors. (Note: Not recommended for use with ProSafe Antennas ANT2405, ANT2409 or ANT24D18.)
Power over Ethernet Required
Security

Wi-Fi Protected Access (WPA, WPA2)

Wired Equivalent Privacy (WEP) 64-bit, 128-bit encryption

IEEE 802.1x RADIUS authentication with EAP TLS, TTLS, PEAP

Wireless access control to identify authorised wireless network devices

MAC address authentication

Secure Sockets Layer (SSL) remote management login
Network Management

Remote configuration and management through Web browser, SNMP or telnet with Command Line Interface (CLI)

SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB
Advanced Wireless Features

Point-to-point wireless bridge mode

Point-to-multipoint wireless bridge mode

Simultaneous wireless bridge and access point mode

Wireless Distribution System (WDS)

Adjustable transmit power control (TPC) from 100 mW down to 0 mW
Warranty

Access point: NETGEAR® Lifetime Warranty

Power supply: 3-year warranty
Package Contents

ProSafe Dual Band Wireless Access Point (WNDAP350)

12V, 1A power adapter, localised to country of sale
Ordering Information

North America: WNDAP350-100NAS
ProSupport Service Packs Available
OnCall 24x7, Category 1
XPressHW, Category 1
This product is packaged with a limited warranty, the acceptance of which is a condition of sale. This product has been tested for quality assurance and this product or its components may have been recycled.
*Basic technical support provided for 90 days from date of purchase.
†Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate and wireless coverage. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards.
‡"N", "Wireless-N" and "draft 802.11n" refer to compliance with IEEE 802.11n draft specification version 2.0 only.