business products > wireless > access points > wg103

WIRELESS ACCESS POINT - WG103

ProSafe™ 802.11g Wireless Access Point


DOWNLOAD PDF DATASHEET
WHERE TO BUY
SUPPORT / DRIVERS
This product is covered by ProSupport OnCall 24x7 This product is covered by ProSupport XPressHW NETGEAR LIFETIME WARRANTY

Intelligent Networking Features for a Scalable, Secure Solution

High-speed IEEE 802.11g, up to 108 Mbps in turbo mode

Comprehensive SNMP functionality for advanced network management


Overview  |  Specifications  |  System Requirements

Key Features

High-speed IEEE 802.11g, up to 108 Mbps in turbo mode

Extensive Security features include:

WiFi Protected Access™ (WPA/WPA2), 802.11i

Multiple BSSID

Rogue AP detection

MAC address filtering

802.1x with RADIUS support

WPA2 data encryption when using WDS bridging

Disable/enable SSID broadcast

Comprehensive SNMP functionality for advanced network management

Quality of Service (QoS) with wireless multi-mode (WMM)

Save battery power for clients with wireless multi-mode power save (WMM-PS)

Deploy over large areas with Wireless Distribution System (WDS):

Point-to-point bridging

Point-to-multipoint bridging

Repeating

Client mode (future release)

Accepts high-gain accessory antennas for greater coverage

Sturdy metal chassis with Kensington Lock slot

Plenum-rated for safe and convenient placement above drop-down ceilings

Support for IEEE802.3af Power over Ethernet (PoE):

Allows flexible AP placement not limited to outlet location

Use full 100 meter distance of Ethernet cable

Eliminates extra power cables

Physical Specifications


Dimensions: 158 x 101 x 29mm (6.22 x 3.97 x 1.14 in)


Weight: 402.5 g (0.88 lb)


Processor and Memory


Atheros®, 8 MB flash, 32 MB SDRAM


Wireless


IEEE 802.11g 54 Mbps Wireless Access Point


Antenna: 5 dBi, 2.4 GHz detachable


Typical maximum transmit output power (varies based on country and/or region selection to ensure local regulatory compliance): 20 dBm


Advanced Wireless Features


WDS point-to-point wireless bridge mode


WDS point-to-multipoint wireless bridge mode


WDS repeater mode


Adjustable wireless output power


Network Management


Remote configuration and management through Web browser, or SNMP (v1, v2c)


Physical Interfaces


LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support


One (1) reverse SMA antenna connector


Lighted Status LEDs


Power, test, LAN, and WLAN 802.11g


Security


40-bit (also called 64-bit), 128-bit, Wired Equivalent Privacy (WEP) Encryption, WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK)


Rogue AP detection


IEEE 802.1x authentication


MAC address filtering


8 BSSID


Kensington Lock slot for physical security


Secure SSL browser connection


Number of VLANs: 9


Power


Power adapter: 12V DC, 1.0 A; plug is localized to country of sale


PoE power consumption: 5W


Package Contents


ProSafe® 802.11g Wireless Access Point (WG103)


One (1) 5 dBi detachable antenna


Resource CD


Power adapter


Ethernet cable


Installation guide


Warranty


Access point: NETGEAR Lifetime Warranty


Power supply: NETGEAR 3-year Warranty


ProSupport Service Packs Available


OnCall 24x7, Category 1


PMB0331-100 (US)

PMB0331 (non-US)


XPressHW, Category 1


PRR0331

System Requirements


Broadband (cable, DSL) Internet service and modem with Ethernet connection


2.4 or 5.0 GHz 802.11n Draft 2.0/802.11 a/b/g specification wireless adapter. Alternatively, an Ethernet adapter and cable for each computer


Microsoft® Windows® Vista™, XP, 2000, 98, Me, Mac® OS, UNIX®, Linux®


Microsoft® Internet Explorer® 5.0, Mozilla Firefox® 2.0, or Safari® 1.4 or higher




Related Products



 
© 1998 - 2009 NETGEAR®
disclaimer | privacy | RoHS
Offices Worldwide:
Locate product by code: