business products > wireless > access points > WAGL102

LIGHT WIRELESS ACCESS POINT- WAGL102

ProSafe™ Dual-Band 802.11a/g Light Wireless Access Point


NETGEAR's ProSafe™ Dual Band Light Wireless Access Point WAGL102 is part of the NETGEAR ProSafe™ Smart Wireless Solution delivering high performance wireless access, managed and configured by the NETGEAR ProSafe™ Smart Wireless Switch (WFS709TP).



DOWNLOAD PDF DATASHEET
WHERE TO BUY
SUPPORT / DRIVERS
NETGEAR LIFETIME WARRANTY
This product is covered by ProSupport OnCall 24x7 This product is covered by ProSupport XPressHW


KEY FEATURES

Managed by WFS709TP

Wireless Connectivity - 54 Mbps or 108 Mbps in dynamic mode

Supports centralised configuration, management, monitoring and planning of the wireless infrastructure.

Locate anywhere in the office with Power over Ethernet support

Plenum rated: Approved to deploy above drop-ceilings & under raised floors

Controlled and managed by the ProSafe™ Smart Wireless Switch (WFS709TP)

2 detachable 5 dBi antennas (2.4 GHz and 5 GHz)


Secure

Managed and configured by the NETGEAR ProSafe™ Smart Wireless Switch (WFS709TP), the WAGL102 is a "light" wireless access point that implements the 802.11 standard. As part of the centralised architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 and 802.1x support happens at the NETGEAR ProSafe™ WFS709TP. The NETGEAR ProSafe™ Smart Wireless Switch also supports MAC address authentication, support for multiple BSSID/ VLANs and guest/contractor access.

Versatile

As part of the NETGEAR ProSafe™ Smart Wireless Solution, the WAGL02 is cost-effective and simple to install and use. In addition, it's Wi-Fi certified and plenum rated-appropriate for placement above drop-down ceilings and under raised floors. It is fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR's ProSafe™ 2.4 GHz antennas for expanded wireless capacity and range. Protected with a NETGEAR Lifetime Warranty, the WAGL102 includes the embedded IEEE 802.3af Power over Ethernet (PoE) port which expands installation options by eliminating the need to locate the Light Wireless Access Point near a power outlet.


Related Products




TECHNICAL SPECIFICATION

Physical Connectivity:

  • 1 x 10/100 LAN port (RJ-45) with Auto Uplink™ and 802.3af Power over Ethernet (PoE) support
  • Antenna connector for 2 x reverse SMA
  • Power Output 1 VDC, 1.2 A: plug is localised for UK/Ireland use

System Requirements:

  • Windows ® 98, Me, 2000 or XP
  • 2 Mbytes of available disk space


site by | disclaimer | privacy | RoHS
Copyright © 1998 - 2008 NETGEAR®